[wanggang]

Okay, I think it might be damaged. Because it does not work, there is no response after the Circuit Board is connected to the computer.

[wanggang]

Thank you for your reply, I didn’t change other PCs, but I tried to write different mirrors to the SD card, and then inserted it into the controller and connected the computer. Now the problem seems more serious, because my PC cannot recognize the hardware, after I Inserted the Controller into the PC, The Device Manager port Reported An Error, “This hardware is not connected to the computer (cous de 45) “. When I Change a Computer, the device manager does not add any device (port). I’m not sure where the problem is.

[wanggang]

I think there is a problem with my controller. I first downloaded Chibio-OS-OS-2021-06-18.IMG, and then wrote it into Balenaetcher’s SD card, and then inserted the SD card into the controller. What should I do if the controller is not available? On the other hand, please forgive me to ask a stupid question. After connecting Chibio to the PC, do I need to operate V2.3 based on Chibio software? In 1.2, “Install Drivers for the Beaglebone on Your PC. These Can be doubleded for various operating systems Here: https://beagleboard.org/getting-started #Troubleshooting”, I can’t confirm which driver I have downloaded on this website. Thank you for your reply!

[wanggang]

Is this image of Linux and Uboot both burned?

[wanggang]

Hello, how do I download the driver? Also, after inserting the SD card, I still cannot connect to the Putty. Do I have a problem with the operation?

[wanggang]

I encountered the same problem as the original poster, and on the website provided by step 1.2.1, https://beagleboard.org/getting-started #Troubleshooting.

[Author]

Posts