Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Pump rate #1221
    Tatsuya
    Participant

    Hi Harrison,

    I tried both with and without pump board. This difference made no sense.(i.e. The same error occurred.)

    I’ll ask Labmaker about this problem.

    Thank you for the help!

    Tatsuya

    in reply to: Pump rate #1219
    Tatsuya
    Participant

    Hi Harrison,

    I firmly wiped out silver rings with alcohol and unpluged the sensor, but it didn’t work.
    The same error sentences were printed.

    Is there any other solution?

    Thank you.

    Tatsuya

    in reply to: Pump rate #1213
    Tatsuya
    Participant

    Hi Harrison,

    Thank you for the reply.
    >You said it worked well, but then at some point it started showing this error – is that correct?
    Yes. It worked well until last Wednesday, and then every time I try to execute “bash cb.sh”, this error occurs.

    I can’t know if the cause is due to one specific reactor because I have only one reactor.
    However, even after wiping down the lid with alcohol, the same error happened.

    Is there another possible cause?

    Thank you
    Tatsuya

    in reply to: Pump rate #1211
    Tatsuya
    Participant

    Hi Harrison,

    I took over Chi. Bio. from Nobuhiro.

    I replaced app.py with newly released one, and pumps come to work well!
    Thank you for updating!

    However, after several experiment, I bumped into another problem.
    When control board is connected with reactor and then execute “bash cb.sh” in putty terminal, it says “Failed to recover multiplexer on device M0”

    Start up is successfully complete if no reactor is connected.
    But I connect reactor and press “scan” in GUI, then the same error occurs.

    Do you know any solutions?

    Thank you.
    Tatsuya

    Below is error statements:

    root@beaglebone:~# cd chibio
    root@beaglebone:~/chibio# bash cb.sh
    [2021-05-20 16:55:11 +0000] [1797] [INFO] Starting gunicorn 20.1.0
    [2021-05-20 16:55:11 +0000] [1797] [INFO] Listening at: http://192.168.7.2:5000 (1797)
    [2021-05-20 16:55:11 +0000] [1797] [INFO] Using worker: sync
    [2021-05-20 16:55:11 +0000] [1800] [INFO] Booting worker with pid: 1800
    2021-05-20 16:55:19.602343 Starting watchdog
    2021-05-20 16:55:22.085918 Initialising devices
    2021-05-20 16:55:22.161820 Failed Multiplexer Comms 1 times
    2021-05-20 16:55:22.217919 Failed Multiplexer Comms 2 times
    2021-05-20 16:55:22.273809 Failed Multiplexer Comms 3 times
    2021-05-20 16:55:22.309732Failed to recover multiplexer on device M0
    2021-05-20 16:55:22.365795 Failed Multiplexer Comms 4 times
    2021-05-20 16:55:22.401661Failed to recover multiplexer on device M0
    2021-05-20 16:55:22.457796 Failed Multiplexer Comms 5 times
    2021-05-20 16:55:22.493649Failed to recover multiplexer on device M0
    2021-05-20 16:55:22.750045 Failed Multiplexer Comms 6 times
    2021-05-20 16:55:22.785651Failed to recover multiplexer on device M0
    2021-05-20 16:55:22.841842 Failed Multiplexer Comms 7 times
    2021-05-20 16:55:22.877651Failed to recover multiplexer on device M0
    2021-05-20 16:55:22.933769 Failed Multiplexer Comms 8 times
    2021-05-20 16:55:22.969711Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.025787 Failed Multiplexer Comms 9 times
    2021-05-20 16:55:23.061646Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.117817 Failed Multiplexer Comms 10 times
    2021-05-20 16:55:23.153646Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.209845 Failed Multiplexer Comms 11 times
    2021-05-20 16:55:23.245678Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.301800 Failed Multiplexer Comms 12 times
    2021-05-20 16:55:23.337695Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.393778 Failed Multiplexer Comms 13 times
    2021-05-20 16:55:23.429713Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.485780 Failed Multiplexer Comms 14 times
    2021-05-20 16:55:23.521698Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.577792 Failed Multiplexer Comms 15 times
    2021-05-20 16:55:23.613753Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.669803 Failed Multiplexer Comms 16 times
    2021-05-20 16:55:23.705644Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.761918 Failed Multiplexer Comms 17 times
    2021-05-20 16:55:23.797656Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.853813 Failed Multiplexer Comms 18 times
    2021-05-20 16:55:23.889649Failed to recover multiplexer on device M0
    2021-05-20 16:55:23.945795 Failed Multiplexer Comms 19 times
    2021-05-20 16:55:23.981645Failed to recover multiplexer on device M0
    2021-05-20 16:55:24.037788 Failed Multiplexer Comms 20 times
    2021-05-20 16:55:24.073643Failed to recover multiplexer on device M0
    2021-05-20 16:55:24.129788 Failed Multiplexer Comms 21 times
    2021-05-20 16:55:24.165646Failed to recover multiplexer on device M0
    2021-05-20 16:55:24.166848Failed to communicate to Multiplexer 10 times. Disabli ng hardware and software!
    [2021-05-20 16:55:24 +0000] [1797] [INFO] Shutting down: Master
    [2021-05-20 16:55:24 +0000] [1797] [INFO] Reason: App failed to load.

Viewing 4 posts - 1 through 4 (of 4 total)
Log in/Register
Scroll to top