Chibio with additional features

[hello_world]

We have added features that we felt were necessary during our experiments and made modifications to parts that needed change.
While the implemented features and changes may seem somewhat awkward or may have issues, we would appreciate it if anyone interested in the added features and changes could refer to our code and discuss any problems while using it.

https://github.com/colabbear/ChiBio.git

Additional features
1. Real-time notifications using Discord Webhooks
2. A function to pause until multiplexer connection is revived when a “Failed to recover multiplexer on device” error happens
3. A function to set the cycle time and total experiment time for each reactor
4. Changes for low average flow rate

[harrison]

Thanks, this is really cool!!

[pyrrhicPachyderm]

This looks excellent! We’ve been trying to adjust the pump cycle time for much lower average dilution rates too, and your changes 3 & 4 look a lot like what I was trying to do a few months ago (that prompted this question). Would you mind elaborating on what you’ve changed to make this work?

Regards,
Christopher Brown
University of Queensland

[hello_world]

Thank you!!

[hello_world]

It may be strange, but if I were to draw a rough flowchart of original chibio based on my understanding, it would look like this:

The differences in the operation of the pump according to the changes are as follows:

You can check the code changes at the following links:
link1
link2
link3

• This reply was modified 1 month, 1 week ago by hello_world.

[Author]

Posts